Technical data

23 / 86
Siemens RDG100KN Basic documentation CE1P3191en
Building Technologies Functions 22 Jun 2010
3.4 Applications overview
The thermostats support the following applications, which can be configured using
the DIP switches at the rear of the unit or a commissioning tool.
DIP switches 1...3 need to be set to OFF (remote configuration, factory setting) to
select an application via commissioning tool.
The tool offers the applications printed in bold text (basic applications).
For universal applications (chilled ceiling, etc.), refer to section 3.6.9.
Application DIP switches Diagram
Remote configuration
via commissioning tool (factory setting)
 Synco ACS
 ETS3 professional
(Parameter and application download with
ETS3 will be implemented later)
1
ON
23
OFF
45
Heating or cooling
 2-pipe fan coil unit
(heating or cooling)
 Chilled / heated ceiling
(heating or cooling)
1 2 3 4 5
ON
OFF
(B1)
M1
Y1
T
B2
T
T
(B1)
Heating or cooling with electric heater
 2-pipe fan coil unit and electric heater
(heating or cooling)
 Chilled / heated ceiling and electric heater
(heating or cooling)
1 2 3 4 5
ON
OFF