Data Sheet for Product

11 / 26
Siemens RDF880KN… A6V11282546_en--_e
Smart Infrastructure Touch Screen Flush-mount Room Thermostats with KNX Communications 2021-02-26
LCD display
Parameter
Range
Factory setting
Operation Selector
1: COMF > PROT
2: COMF > ECON > PROT
1
Internal Relative
Humidity Sensor
OFF: Disable
ON: Enable
ON
Maximum Fan
Speed
1 to 7
3
Maximum auto-
swing
0: no swing function
1 to 10 positions
0
Chinese Text
Display
0: Disable
1: Enable
0
End of wizard
setup
-
-
If more details are required about parameters, refer to basic documentation
CE1P3174.
To reload factory setting for all parameters, set parameter P71 to ON. Restart the
thermostat after reset, all LCD segments flash, indicating that the reset is correct.
3 seconds later, the thermostat is ready for commissioning by qualified HVAC staff.
Reset