Environmental Declaration

EPD - Type II
Based on ISO 14021
Typical energy consumption
[kWh/a]
Special components (part of the assembled PCB)
[pcs]
Packaging
Folded box [g]
Inlay
Manual
Screw
Comments
A6V11625786 05.03.2019
62
8
36
39
25
62
8
36
39
25
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive.
To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the candidate list
according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) in
concentrations above 0.1 % w/w.
(Status according to the creation date of this document.)
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.
Legal Disclaimer: This declaration is for information purpose only.
Siemens Switzerland Ltd. therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent under the
law.
This Environmental Product Declaration does not constitute a guarantee of the c omposition of a product, neither does it guarantee that the product will retain a particular composition
for a particular period.
The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must
not be disposed of as unsorted municipal waste. Regarding disposal, use the systems setup for collecting electronic
waste.
Observe all local and applicable laws.
Disposal
Regulation (EC) No. 1907/2006 (REACH)
The device is halogen-free with exception of:
PCB (halogenated)
Restricted
Page 4/4