Operating Instructions
Table Of Contents
- INTRODUCTION
- COMMISSIONING: Download via ETS
- COMMISSIONING: Local via Dip Switches
- CONFIGURE PARAMETERS via WIZARD
- SCREEN SAVER / SELECTION SCREEN
- IF UNIT in PROTECTION MODE
- CHANGE ROOM TEMPERATURE SETPOINT
- ADJUST FAN MODE / FAN SPEED
- CHANGE OPERATING MODES
- SELECT ADDITIONAL INFO
- MANUAL HEAT/COOL CHANGEOVER (P01=2)
- PARAMETER MODE ACCESS
- User Level Control Parameters
- Installer Level Control Parameters
- ALARMS & SERVICE REMINDERS (IF ANY)
- 介绍
- 调试：通过 ETS 下载
- 调试：通过拨码开关在本地进行
- 根据提示配置参数
- 屏幕保护 / 选择屏幕
- 如果温控器处于保护模式
- 更改室内温度设定值
- 调整风机模式 / 风机转速
- 更改运行模式
- 选择其他信息
- 手动供热 / 制冷转换 (P01=2)
- 进入参数模式
- 用户级控制参数
- 安装级控制参数 操作需要暖通空调知识
- 告警和服务提醒（如果存在）
6 CE1B3174.4xx, V4.0
COMMISSIONING: Local via Dip Switches
1. Set application via
dipswitches
Refer to
2. First power up
Unit shows selected application
Refer to table below for details.
3. Configure basic
control parameters
via Wizard
See Configure
Parameters
via Wizard on next page
Display
Applications
APP
2P
2-PIPE
APP
2PEH
2-PIPE with
ELECTRIC HEATER
APP
4P
4-PIPE
APP
2P3P
2-PIPE with
3-POSITION OUTPUT
APP
H
HEATING
(RDD810KN only)
en
zh