Operating Instructions
Table Of Contents
- INTRODUCTION
- COMMISSIONING: Download via ETS
- COMMISSIONING: Local via Dip Switches
- CONFIGURE PARAMETERS via WIZARD
- SCREEN SAVER / SELECTION SCREEN
- IF UNIT in PROTECTION MODE
- CHANGE ROOM TEMPERATURE SETPOINT
- ADJUST FAN MODE / FAN SPEED
- CHANGE OPERATING MODES
- SELECT ADDITIONAL INFO
- MANUAL HEAT/COOL CHANGEOVER (P01=2)
- PARAMETER MODE ACCESS
- User Level Control Parameters
- Installer Level Control Parameters
- ALARMS & SERVICE REMINDERS (IF ANY)
- 介绍
- 调试：通过 ETS 下载
- 调试：通过拨码开关在本地进行
- 根据提示配置参数
- 屏幕保护 / 选择屏幕
- 如果温控器处于保护模式
- 更改室内温度设定值
- 调整风机模式 / 风机转速
- 更改运行模式
- 选择其他信息
- 手动供热 / 制冷转换 (P01=2)
- 进入参数模式
- 用户级控制参数
- 安装级控制参数 操作需要暖通空调知识
- 告警和服务提醒（如果存在）
CE1B3174.4xx, V4.0 5
COMMISSIONING: Download via ETS
1. Dipswitch setting
All in OFF positions
2. First power up
“NONE” means that no
application being downloaded
or selected before
3. Touch & hold this
icon > 5 s to enter
Programming mode
4. Ready for downloading
address & application
Touch “ON“ to exit
en
zh