User Manual

CERTIFICATE OF CONFORMITY
CERTIFICATE No: 253/11749/14
Delivered to
SIEMENS SCHWEIZ AG
Gubelstrasse 22
CH-6301 ZUG
SWITZERLAND
This is to certify that the underneath listed product:
RDF800KN Room Thermostat
Order number: RDF800KN
Application program: RDF800KN/1.0
EIB logo: -
KNX logo: Yes
has been satisfactorily assessed by a KNX Association as regards software (report No. A1/253/1/15 from 8/12/2015) and
as regards hardware, under the rules of the KNX certification system against the requirements of the KNX specifications
v2.1.
The certificate holder is granted right of entry of the above product into the KNX register of qualified products
(established for the first time on 8/13/2015).
The certificate holder may use the KNX or EIB (see above) trademark in accordance with the relevant trademark rules,
as laid down in the KNX trademark and certification documentation (KNX issue 02/2006).
Subject to continuing compliance with the rules and the declaration previously given this certificate has an unlimited
validity.
Chief Technical Officer
KNX ASSOCIATION cvba
Date: 14 August 2015
This certificate is not transferable and remains property of KNX Association cvba. KNX Association cvba has no liability for product failures after product
registration or certification.