Data Sheet for Product
Table Of Contents
- Use
- Functions
- Applications
- Applications for fan coil systems
- Applications for Universal systems
- Applications for heat pump systems
- Type summary
- Ordering
- Equipment combinations
- Accessories
- Mechanical design
- Engineering notes
- Mounting and installation
- Commissioning notes
- Disposal
- Technical data
- Connection terminals
- Connection diagrams
- Dimensions (mm)
3 / 20
Siemens RDF800KN… CB1N3174en
Smart Infrastructure Touch Screen Flush-mount Room Thermostats with KNX Communications 2021-04-22
• Purge function together with 2-port valve in a 2-pipe changeover system
• Reminder to clean fan filters (adjust with P62)
• Floor heating temperature limitation
• Reload factory settings for commissioning and control parameters
• Wizard function for easy commissioning via HMI
• KNX bus (terminals CE+ and CE-) for communication with Synco or KNX
compatible devices
• Display of time of day via KNX bus
• Display of outdoor temperature via KNX bus on INFO page
• Time scheduling and central control of setpoints via KNX bus
• With a Synco RMx7xx controller, the energy demand signal of the thermostat is
used to optimize energy supply
Applications
The thermostats support the following applications, which can be configured using
the DIP switches on the inner side of the thermostat's front panel or a
commissioning tool.
All DIP switches need to be set to OFF (factory setting) to select an application via
commissioning tool.
Remote configuration, via commissioning tool (factory
setting)
• Synco ACS
• ETS5
DIP switches
Remote configuration