Data Sheet for Product

9
Siemens
A6V10889950_en--_j
Smart Infrastructure
2022-01-05
Control parameters
Parameter settings
To optimize control performance, use the local HMI to adjust a number of control
parameters. All control parameter settings are retained after power down.
Proceed as follows to change the control parameters:
Press and hold down the + and - buttons simultaneously for more than 3 seconds.
Release the buttons, and within 2 seconds, press and hold down the + button for 3
seconds.
P01 is displayed.
Press < or > to access the desired parameter and press the √ button.
The current value of the selected parameter is displayed.
Press the + or - button to change the value.
Press the √ button to confirm the change, and repeat steps 3 to 5 to change more
parameters.
Press to exit the parameter setting mode.
Reload factory setting
● Select parameter P71 and set it to On.
● The factory settings of the control parameters are reloaded.
– “- - -” is displayed on the screen while reloading.