User Manual

HVAC Products
Legal disclaimer: This declaration is for information purposes only
The above information may be inaccurate or incomplete. Siemens Building Technologies Ltd. therefore does not assume liability for any
error or for any consequences which may arise from the use of this information to the maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.
Siemens Building Technologies CE1E3067en 02-Mar-07 Page 2 of 2
Materials
total weight of device
≤187g
Plastics ABS Halogen free Front Case
≤10 g
ABS Halogen free Rear Case
≤20 g
ABS Halogen free Power BD Housing
≤14 g
ABS Halogen free Knob
≤6 g
PC Lens
≤8 g
Metals Mild steel, nickel plated screw
≤5 g
Mild steel LCD Bracket
≤7 g
Circuit boards with
components
FR4 containing brominated flame
retardant / components mounted with
SnPb37 solder
Main PCB
≤117g
Special Components
None
0 g
Remark: SECC
Material commodity: Electrolytic Zinc-coated steel sheet in coil, Unizinc
(Base Metal cold rolled) Specification: JIS G3313 SECC coating weight
E16-E16 Chemical Treatment C2/C2
(Weights in brackets are included in already under materials declared components)
Disposal
Do not dispose of the device as part of standard household garbage, but as
special waste from electrical and electronic components. This particularly applies
to electronic circuit boards.
Additionally, the law may mandate special treatment for specific components or
special treatment may be ecologically sensible.
Observe all local and applicable laws!
Notes
Materials:
Listed weights are maximum ratings, covering all units marked with RDF310..& RDF410..
Environmental benefits:
Minimisation of energy consumption in heating and cooling systems. Energy saving mode reduces power
consumption.