User Manual

11/16
Siemens Room Temperature Controllers N3067en
Building Technologies 2014-10-14
Mechanical design
The controller consists of two parts:
· Front panel which accommodates the electronics, the operating elements and the
built-in room temperature sensor
· Mounting base with the power electronics
The mounting base carries on the rear side the screw terminals. It fits on a square
conduit box with fixing centres 60.3mm. The front panel engages in the mounting base
and snaps on.
1
2
4
5
6
7
8
9
10
11
12
13
14
15
6
3
3
3067Z 04
5
1 Display of the room temperature, setpoints and control parameters
2
Symbol used when displaying the current room temperature
3 Standby / fan mode status
Standby mode
AUTO Auto fan active
fan speed low, medium, high
4 in cooling mode
in heating mode
5
AUTO
Auto Timer mode
Normal operation
Economy (Energy saving) mode
6 Buttons for adjusting the setpoints, control parameters and time of day
7 Button for changing fan operation and Standby (
)
8 Manual heating / cooling changeover ( )
9 Infrared receiver (only with RDF310.21, RDF410.21)
Only on RDF410...
10 Weekday 1..7 (1 = Monday / 7 = Sunday)
11 Current time of day
12 Auto timer program (Prog)
13 Button operating mode (Mode): Normal operation / Auto Timer mode
14 Button for setting time of day and weekday (
)
15 Confirmation (ok)
Setting and operating
elements
Legend