User Manual

s
Building Technologies
02-Oct-2011 CE1E3079en Page 2 of 2
Materials
Total weight of device
261 g
Plastics ABS halogen-free Top housing
17 g
ABS halogen-free Bottom housing
35 g
ABS halogen-free Mounting Frame
30 g
ABS halogen-free Button
5 g
PC halogen-free Clear Lens
31 g
Metals CuZn Tin plated Terminals Pins
3 g
Steel Tin plated LCD Bezel
3 g
Steel Galvanized Screws
6 g
PCB assembled FR4, TBBA, SnAgCu Logic board
60 g
FR4, TBBA, SnAgCu Relay board
32 g
FR4, TBBA, SnAgCu Modbus board
18 g
FR4, TBBA, SnAgCu SMPS board
21 g
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
Special components
Relay, contacts AgNi 5 pcs (7 g)
Weights in brackets are already included in components declared under materials.
Disposal
The device is classified as waste electronic equipment in terms of the European
Directive 2002/96/EC (WEEE) and should not be disposed of as unsorted municipal
waste. The relevant national legal rules are to be adhered to. Regarding disposal,
use the systems setup for collecting electronic waste. Observe all local and
applicable laws.
Comments
Materials:
The device is free from substances banned by the Directive 2002/95/EC (RoHS) - allowing for the
exemptions acc. to Decision 2010/571/EU:
Pb, Hg, Cr6+, PBB, PBDE: < 0.1% by weight in homogeneous materials.
Cd: < 0.01 % by weight in homogeneous materials.
The device is halogen-free excepted the PCBs (TBBA)
Legal disclaimer: This declaration is for information purposes only
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee
that the product will retain a particular composition for a particular period.
Siemens Switzerland Ltd therefore does not assume liability for any error or for any consequences which may arise from the use of
this information to the maximum extent under the law.
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.