User Manual

ManualsBrandsSiemens ManualsThermostats (temperature controller with sensor)EPD for RDF302.B

EPD - Type II

Based on ISO 14021

RDF302.B Semi-flush mounted Room Controller

Designation

Product line, product range

Siemens Switzerland Ltd.

Building Technologies Division

Theilerstrasse 1a

CH-6300 Zug, Switzerland

Management System since by

ISO 14001 (Environment) 05.07.2005 SGS

ISO 9001 (Quality) 08.05.2017 SGS

OHSAS 18001 (OH&S) 12.12.2011 SGS

Typical energy consumption 36kWh/a

Maintenance

Fire protection according to

Fire load 4MJ

20-PAP Corrugated fiber board Folded box 33g

20-PAP Corrugated fiber board Inlay 35g

22-PAP Paper Manual 18g

RDF

Environmental

Product Declaration

Type of equipment /

Product No.

Not necessary

On notice

EN 60730-1

Type of equipment /

Product No.

Product

Environmentally compatible

product design

Process control

Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes the

environmental impact of its products with respect to production, procurement, sales, use, services and disposal during the

product and process planning phases by complying with Siemens EP Standard (former SN 36350) "Specifications on

Environmentally Compatible Product and System Design".

Product use

Risk of fire

Packaging

Restricted Page 1/6

Summary of content (6 pages)

PAGE 1
EPD - Type II Based on ISO 14021 Environmental Product Declaration Product Type of equipment / Product No. Product Type of equipment / Product No. RDF302.B Semi-flush mounted Room Controller Designation Product line, product range RDF Process control Siemens Switzerland Ltd. Building Technologies Division Theilerstrasse 1a CH-6300 Zug, Switzerland Management System since by ISO 14001 (Environment) 05.07.2005 SGS ISO 9001 (Quality) 08.05.2017 SGS OHSAS 18001 (OH&S) 12.12.
PAGE 2
EPD - Type II Based on ISO 14021 Notes on disposal One-way, recyclable Total weight of device Materials 177g The total weight of a device may deviate from the total of the weights of all individual components due to rounding. Plastics Metals Others ABS; halogen-free Front Case 10g ABS; halogen-free Rear Housing 22g ABS; halogen-free Back Cover 20g PC; halogen-free LCD Lens 8g ABS; halogen-free Buttons 6g Steel; galvanized Screw 2g Steel; Tin plated LCD Bracket 5g 43.
PAGE 3
EPD - Type II Based on ISO 14021 PCBAs (Printed Circuit Board assembled) FR4; TBBA; solder SnAgCu Logic 20g FR4; TBBA; solder SnAgCu Relay 30g FR4; TBBA; solder SnAgCu Modbus 18g FR4; TBBA; solder SnAgCu SMPS 19g Special components (part of the assembled PCB) [g] Total weight of device Front Case RDF302.
PAGE 4
EPD - Type II Based on ISO 14021 LCD 15 Cable / wire 2 Logic 20 Relay 30 Modbus 18 SMPS 19 Fire load [MJ] 4 [kWh/a] 36 Typical energy consumption Special components (part of the assembled PCB) [pcs] Restricted Page 4/6
PAGE 5
EPD - Type II Based on ISO 14021 Packaging Folded box [g] 33 Inlay 35 Manual 18 The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must not be disposed of as unsorted municipal waste. Regarding disposal, use the systems setup for collecting electronic waste. Observe all local and applicable laws.
PAGE 6
EPD - Type II Based on ISO 14021 This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular composition for a particular period. Siemens Switzerland Ltd. therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent under the law.