Technical data
Table Of Contents
- 1. About this document
- 2. Summary
- 3. Functions
- 3.1 Temperature control
- 3.2 Operating modes
- 3.3 Room temperature setpoints
- 3.4 Applications overview
- 3.5 Additional functions
- 3.6 Control sequences
- 3.7 Control outputs
- 3.8 Fan control
- 3.9 Multifunctional input, digital input
- 3.10 Handling faults
- 3.11 KNX communications
- 3.11.1 S-mode
- 3.11.2 LTE mode
- 3.11.3 Zone addressing in LTE mode (in conjunction with Synco)
- 3.11.4 Example of heating and cooling demand zone
- 3.11.5 Send heartbeat and receive timeout
- 3.11.6 Startup
- 3.11.7 Heating and cooling demand
- 3.11.8 Fault function on KNX
- 3.11.9 KNX switching groups (RDF301.50, RDF301.50H only)
- 3.12 Communication objects (S-mode)
- 3.13 Communication objects (LTE-mode)
- 3.14 Control parameters
- 4. Handling
- 5. Supported KNX tools
- 6. Connection
- 7. Mechanical design
- 8. Technical data
3.13 Communication objects (LTE-mode)
RDF
Geographical zone
A.R.S
Room operating mode:
Time switch
(Time switch zone)
X.1.1 / X.Y.1
Application mode
Room operating mode:
Preselection
Geographical zone
A.R.S
X.Y.1
Room temperature output
Comfort setpoint
Setpoints heating
Setpoints cooling
Fan speed
Setpoint shift heating
Setpoint shift cooling
Heat distr. zone
Heating coil energy demand
heating coil
Heating/Cooling changeover
Ref. distr. zone
cooling coil
Cooling coil energy demand
Heat distr. zone
heating surface
Energy demand heating
surface
Broadcast
Fault transmission
Fault information
Fault text
Outside air temp. zone
Outside temperature
fix 31
64 / 92
Siemens RDF301, RDF301.50..., RDF600KN Basic documentation CE1P3171en
Building Technologies Functions 2014-05-23