Technical data
Table Of Contents
- 1. About this document
- 2. Summary
- 3. Functions
- 3.1 Temperature control
- 3.2 Operating modes
- 3.3 Room temperature setpoints
- 3.4 Applications overview
- 3.5 Additional functions
- 3.6 Control sequences
- 3.7 Control outputs
- 3.8 Fan control
- 3.9 Multifunctional input, digital input
- 3.10 Handling faults
- 3.11 KNX communications
- 3.11.1 S-mode
- 3.11.2 LTE mode
- 3.11.3 Zone addressing in LTE mode (in conjunction with Synco)
- 3.11.4 Example of heating and cooling demand zone
- 3.11.5 Send heartbeat and receive timeout
- 3.11.6 Startup
- 3.11.7 Heating and cooling demand
- 3.11.8 Fault function on KNX
- 3.11.9 KNX switching groups (RDF301.50, RDF301.50H only)
- 3.12 Communication objects (S-mode)
- 3.13 Communication objects (LTE-mode)
- 3.14 Control parameters
- 4. Handling
- 5. Supported KNX tools
- 6. Connection
- 7. Mechanical design
- 8. Technical data
Synco 700
Building automation and control system (BACS)
Synco living
Room automation and control system
RDG..., RDF…, RDU…
Room thermostats
OZW772
Web server
RMZ792
Bus operator unit
QAW...
Room unit
ACS Service tool using OCI700.1 (OCI700.1 is delivered
with a service cable which can be plugged into the
service connector on a Synco controller)
RXB, RXL
Room controllers
QAX
Room unit for RXB / RXL room controllers
The RDF KNX devices can be integrated into the Siemens building automation and
control systems (BACS) Desigo / Apogee or into 3rd-party systems. For integration,
either S-mode (group addressing) or individual addressing can be used.
Synco topology
Legend:
Desigo, Apogee and
third-party systems
10 / 92
Siemens RDF301, RDF301.50..., RDF600KN Basic documentation CE1P3171en
Building Technologies Summary 2014-05-23