Data Sheet for Product

7
Siemens
A6V12068497_en--_b
Smart Infrastructure
2021-12-15
Proceed as follows to change the control parameters:
Press and hold the + and - buttons simultaneously for more than 3 seconds.
Service level: Release the buttons, and within 2 seconds, press and hold + until Pxx
is displayed.
Expert level: Release the buttons, and within 2 seconds, press and hold - until Pxx is
displayed.
Press + or - (< or >) to access the desired parameter and the value of the selected
parameter is displayed at the same time.
Press (✓) to edit the value of the required parameter.
Press + or - to increase / decrease or select the value of the current parameter during
editing.
Press (✓) to confirm the new value or press ( ) to cancel the change, and
repeat steps 3 to 5 to change more parameters.
Press ( ) to exit parameter setting mode.