User Manual

87 / 92

Siemens………………..RDF301, RDF301.50..., RDF600KN, RDF600KN/VB, RDF600KN/S Basic Documentation CE1P3171en

Smart Infrastructure 2020-02-21

7. Mechanical design

7.1 General

The thermostats consist of 2 parts:

· Front panel with electronics, operating elements and built-in room temperature

sensor.

· Mounting base with power electronics.

The rear of the mounting base carries the screw terminals.

Slide the front panel in the mounting base and snap on.

RDF301, RDF600KN,

RDF600KN/VB

RDF301.50, RDF600KN/S RDF301.50H

1 Operating mode selector

2 Button for fan operation

3 Buttons to adjust setpoints and control parameters

RDF301.50,

RDF600KN/S

4 Four buttons to control KNX actuators via KNX S-Mode

(functions: switching, dimming, blind control, 8-bit scene)

RDF301.50H 5 Four dedicated buttons for hotel functions (Make Up Room, Do Not Disturb)

via KNX S-Mode (functions: switching)

For operation, refer to section 4.3.