User Manual

ManualsBrandsSiemens ManualsThermostats (temperature controller with sensor)Room Temperature Controllers RCU60../61..

5/8

Siemens Building Technologies Room Temperature Controllers CE1N3046en

HVAC Products 22.08.2003

3041Z01

1 Operating mode selector (RCU60.1 / 61.1)

(normal operation, energy saving mode and standby)

2 Room temperature setpoint knob

3 Setting facility for minimum setpoint limitation (in increments of 1 Kelvin)

4 Setting facility for maximum setpoint limitation (in increments of 1 Kelvin)

DIP switch no. Meaning Position ON Position OFF

1 Operating mode changeover via

external switch

Changeover from normal

operation or standby to-

energy saving mode

Changeover from normal operation

or energy saving to standby

2 Operating action of switch for exter-

nal operating mode changeover

Changeover activated

when contact of switch is

closed

(N.O.)

Changeover activated when con-

tact of switch is open

(N.C.)

3 Standby OFF Frost protection mode (heating

output ON at a setpoint of 8 °C)

4 Switching differential or P-band 1 K in heating mode

0.5 K in cooling mode

4 K in heating mode

2 K in cooling mode

5 Dead zone (Xdz) 2 K

5 K

6 Signal output Y1 (heating) ON / OFF

PWM

7 PWM signal interval for output Y1

(heating)

240 s

90 s

8 Cooling output signal in energy

saving mode

Active Inactive

1) Factory setting