User Manual

7/8
Siemens Room Temperature Controllers CE1N3041en
Building Technologies 2017-11-14
EU Conformity (CE) CE1T3040xx
*)
RCM Conformity CE1T3040en_C1
*)
Degree of protection of housing IP30 EN 60 529
Safety class II to EN 60 730-1
Pollution class normal
The product environmental declaration CE1E3040
*)
contains data on envi-
ronmentally compatible product design and assessments (RoHS compli-
ance, materials composition, packaging, environmental benefit, disposal).
Based on EU Regulation 813/2013 (Eco design directive) and 811/2013 (Labelling di-
rective) concerning space heaters, combination heaters, the following classes apply:
- Application with On/Off operation of a heater
- PWM (TPI) room thermostat, for use with
On/Off output heaters
Class I
value 1%
Class IV value 2%
Connection terminals for Use solid wires or prepared
stranded wires.
2 x 1.5 mm
2
or 1 x 2.5 mm
2
Weight
RCU10
RCU10.1
0.23 kg
0.25 kg
Colour of housing front
white, NCSS0502
-G (RAL 9003)
*) The documents can be downloaded from http://siemens.com/bt/download.
Connection terminals
L
N
Y1
N Y2
D1
GND
3041G01
SELV
L,N Operating voltage AC 230 V
D1,GND Status input for potential-free operating
mode changeover switch
Y1 Control signal PWM / two-position AC 230 V
Y2 Control signal PWM / two-position AC 230 V
Connection diagram
N1 Room temperature controller
S1 External operating mode
changeover switch
Y1 Actuator
Y2 Actuator
Norms and standards
Environmental
compatibility
General
Eco design and
labelling directives