Environmental Declaration

HVAC Products
Legal disclaimer: This declaration is for information purposes only
The above information may be inaccurate or incomplete. Siemens Building Technologies Ltd. therefore does not assume liability for any
error or for any consequences which may arise from the use of this information to the maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.
Siemens Building Technologies CE1E3020en
28-Jun-02 Page 2 of 2
Materials
total weight of device
≤
≤≤
≤220 g
Plastics PC + ABS Halogen free Front housing
≤
≤≤
≤32 g
PC + ABS Halogen free Middle Housing
≤
≤≤
≤34 g
PC + ABS Halogen free Base Plate
≤
≤≤
≤36 g
PC + ABS Halogen free Knob
2g
Metals Brass, nickel plated Terminal plate
7g
SECC*, electrolytic with zinc plated Terminal box
4g
Mild steel, nickel plated Terminal screw
4g
Circuit boards with
components
FR4 containing brominated flame
retardant / components mounted with
SnPb37 solder
Main PCB
≤
≤≤
≤40 g
FR4 containing brominated flame
retardant / components mounted with
SnPb37 solder
Power PCB
≤
≤≤
≤50 g
Special Components
None
g
Remark: SECC
Material commodity: Electrolytic Zinc-coated steel sheet in coil, Unizinc
(Base Metal cold rolled) Specification: JIS G3313 SECC coating weight
E16-E16 Chemical Treatment C2/C2
(Weights in brackets are included in already under materials declared components)
Disposal
Do not dispose of the device as part of standard household garbage, but as
special waste from electrical and electronic components. This particularly applies
to electronic circuit boards.
Additionally, the law may mandate special treatment for specific components or
special treatment may be ecologically sensible.
Observe all local and applicable laws!
Notes
Materials:
Listed weights are maximum ratings, covering all units marked with RCC..
Environmental benefits:
Minimisation of energy consumption in heating and cooling systems. Energy saving mode reduces power
consumption.