Data Sheet for Product
7 / 9
Siemens Temperature Controller RAV11.. CE1N2224F
Building Technologies 2017-11-14
Warning!
No internal line protection for supply lines to external consumers.
Risk of fire and injury due to short-circuits!
∂ Adapt the line diameters as per local regulations to the rated value of the installed
overcurrent protection device.
∂ The power supply lines must have an external circuit breaker with a rated current of
no more than 10 A.
∂ The battery transit tab, which prevents inadvertent operation of the unit during trans-
port and storage, must be removed from the batteries.
∂ The control characteristics can be changed with the help of the DIP switches located
at the rear of the unit. For detailed information, please refer to the commissioning in-
structions.
∂ If the reference room is equipped with thermostatic radiator valves, they must be set
to their fully open position.
∂ If the measured room temperature does not agree with the set room temperature on
the setting knob, the detector should be recalibrated (please refer to "Calibration of
detector").
10 A
L
L1
Y1
M1
N1
A
C
2
4
.
.
.
2
5
0
V
2
2
2
2
A
0
1
N
L Live, AC 24…250 V M1 Circulating pump
L1 N.O. contact,
AC 24…250 V / 8 (3.5) A
N1 RAV11.. controller
N Zero Y1 Regulating unit
Commissioning
Connection diagram