Installation Instructions
Siemens Building Technologies 74 319 0824 0 a G1211 05.01.2011 3/3
de Verdrahtung en Wiring de Entriegelung en Reseting
fr Câblage nl Bedrading
fr
Verrouillage nl Reset
it
Cablaggio
es
Cableado
it Ripristino (reset) es
Reajuste
de
• Spannungsbereich: AC 24...250 V (0,1…16 A)
• Elektrische Anschlüsse und Schutzleiter:
Push-in* Klemmen für Leiter: 0,75...2,5 mm
2
• Verschmutzungsgrad: (2)
• Bemessung-Stossspannung: 2,5 kV
• Kein elektronisches Gerät
• Schutzrohrlänge: 150 mm
• Standards, Normen: CE, DIN
• Produktenorm: EN 14 597
(ATW 1218)
(ASTB 1217)
en
• Rated voltage: AC 24...250 V (0.1…16 A)
• Electrical connections and protective earth:
Push-in* terminals for wire: 0,75...2,5 mm
2
• Degree of pollution: (2)
• Rated impulse voltage: 2,5 kV
• Device without electronics
• Protection pocket length: 150 mm
• Standards: CE, DIN
• Product standards : EN 14 597
(ATW 1218)
(ASTB 1217)
fr
• Plage de tension: AC 24...250 V (0.1…16 A)
• Raccordement électrique et fil de protection:
bornes automatiques pour fil: 0,75...2,5 mm
2
• Degré d'encrassement: (2)
• Tension assignée de tenue aux chocs: 2,5 kV
• Appareil sans électronique
• Longueur gaine de protection: 150 mm
• Normes et standards: CE. DIN
• Normes pour produits: EN 14 597
(ATW 1218)
(ASTB 1217)
nl
• Spanningsbereik: AC 24...250 V (0.1…16 A)
• Elektrische aansluiting en aarding:
Push-in* klemmen voor draden: 0,75...2,5 mm
2
• Vervuilingsgraad: (2)
• Nominale piekspanning: 2,5 kV
• Regelaar bevat geen electronica
• Beschermhulslengte 150 mm
• Standaards en normen: CE, DIN
• Productnorm: EN 14 597
(ATW 1218)
(ASTB 1217)
it
• Tensione d’alimentatione: AC 24...250 V (0.1…16 A)
• Collegamento elettrico e di protezione:
Morsetti a pressione cavo: 0,75...2,5 mm
2
• Grado d‘inquinamento: (2)
• Tensione impulsiva nominale: 2,5 kV
• Dispositivo non elettronico
• Lunghezza guaina: 150 mm
• Norme e omologazioni: CE, DIN
• Norma prodotto: EN 14 597
(ATW 1218)
(ASTB 1217)
es
• Rango de alimentación: AC 24...250 V (0.1…16 A)
• Conexiones eléctricas y conductor protector:
Bornas de presión para cable: 0,75...2,5 mm
2
• Grado de polución: (2)
• Tensión media por impulso: 2,5 kV
• Sin dispositivo electrónico
• Longitud vaina de protección:150 mm
• Estándares: CE, DIN
• Estándares del producto: EN 14 597
(ATW 1218)
(ASTB 1217)
*Push In is a patented connection technology designed by Weidmüller, Germany’s leading manufacturer of electrical connection technologies.
2010 Siemens Switzerland Ltd.
RAG-ST.1 RAG-TW.1
RAG-ST.1