User Manual

Mounting, installation

and commissioning

When mounting the unit, fix the base plate first. Then, make the electrical connections

and fit and secure the cover (also refer to separate Mounting Instructions).

The room thermostat must be mounted on a flat wall and in compliance with local regu-

lations.

If there are thermostatic radiator valves in the reference room, they must be set to their

fully open position.

Maintenance

The room thermostat is maintenance-free.

The diaphragm is filled with environmentally friendly gas.

The device is a waste electronic equipment in terms of the European Directive

2002/96/EC (WEEE) and should not be disposed as part of unsorted municipal waste.

The relevant national legal rules are to be paid attention. Use for disposal the systems

set up to collect electronic waste. Observe all local and applicable laws.

Disposal

Connection diagrams

3007A01

3007A02

3007A03

RAA02 / RAA02.1N RAA03

RAA02.16N

L Switching voltage AC 24... 250 V

N Neutral

N1 Room thermostat

M1 Pump

D1 Zone valve or thermal valve

T Gas-filled diaphragm

2 Control output “Heating”, AC 24... 250 V

3 Control output “Cooling” AC 24... 250 V

5, 6 Operational status indication,

AC 230 V +10/-15 %, 50Hz

Dimensions

90,8

91,2

49,5

3007M01

1322M02

Thermostat / Base plate

4/4

Building Technologies Room thermostats CE1N3007en

HVAC Products 08.11.2006