Environmental Declaration

ManualsBrandsSiemens ManualsSensors Air qualityPartikelgivare QSA2700, QSA2700D

EPD - Type II

Based on ISO 14021

QSA2700 Fine dust sensor to monitor PM2.5 value

QSA2700D

Fine dust sensor with LCD desplay to monitor PM2.5 value

AQS2700

Replacement sensor module for QSA2700 and QSA2700D

Product

Environmental

Product Declaration

Type of equipment /

Product No.

Product line, product range

Beijing Siemens Cerberus Electronics Ltd.

No.1 Fengzhi Dong Lu, Xi Bei Wang, Haidian District

100094, Beijing, China

Management System since by

ISO 14001 (Environment) 14.04.2017 SGS

ISO 9001 (Quality) 08.05.2017 SGS

OHSAS 18001 (OH&S) 14.04.2017 SGS

Typical energy consumption 5kWh/a

Maintenance

Fire protection according to

Fire load 1 … 3MJ

20-PAP Corrugated fiber board Carton Box 0 … 394g

20-PAP Corrugated fiber board Cardboard 0 … 103g

Packaging

Environmentally compatible

product design

Process control

Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes

the environmental impact of its products with respect to production, procurement, sales, use, services and disposal

during the product and process planning phases by complying with Siemens EP Standard (former SN 36350)

"Specifications on Environmentally Compatible Product and System Design".

Product use

Risk of fire

SRA

Restricted Page 1/6

Summary of content (6 pages)

PAGE 1
EPD - Type II Based on ISO 14021 Environmental Product Declaration Type of equipment / Product No. Product QSA2700 Fine dust sensor to monitor PM2.5 value QSA2700D Fine dust sensor with LCD desplay to monitor PM2.5 val AQS2700 Replacement sensor module for QSA2700 and QSA270 Product Product line, product rangeSRA Process control Beijing Siemens Cerberus Electronics Ltd. No.
PAGE 2
EPD - Type II Based on ISO 14021 20-PAP Corrugated fiber board Gift box 0 … 720g 20-PAP Corrugated fiber board Gift box insert 0 … 420g 20-PAP Corrugated fiber board Carton Box 0 … 213g 20-PAP Corrugated fiber board Cardboard 0 … 216g 20-PAP Corrugated fiber board Gift box 0 … 320g 20-PAP Corrugated fiber board Gift box insert 0 … 240g Notes on disposal One-way, recyclable Total weight of device Materials variant *) see below The total weight of a device may deviate from the total of t
PAGE 3
EPD - Type II Based on ISO 14021 PCBAs (Printed Circuit Board assembled) FR4; halogen-free; solder SnAgCu PM2.5 Main Board variant FR4; halogen-free; solder SnAgCu PM2.5 TM Board variant FR4; halogen-free; solder SnAgCu PM2.5 Module BKT Board FR4; halogen-free; solder SnAgCu PM2.
PAGE 4
EPD - Type II Based on ISO 14021 Screw, M2.2x10 (2pcs) 1 1 Screw, M2.2x4 (3pcs) 1 1 Screw, M3x25 (2pcs) 2 2 Sensor 24 24 Lens 14 14 1 Sensor 24 12 LCD PM2.5 Main Board 17 17 PM2.5 TM Board 8 8 PM2.5 Module BKT Board 1 1 PM2.
PAGE 5
EPD - Type II Based on ISO 14021 Packaging Carton Box [g] 394 394 Cardboard 102 102 Gift box 720 720 Gift box insert 420 420 Carton Box 213 Cardboard 216 Gift box 320 Gift box insert 240 The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must not be disposed of as unsorted municipal waste. Regarding disposal, use the systems setup for collecting electronic waste. Observe all local and applicable laws.
PAGE 6
EPD - Type II Based on ISO 14021 Legal Disclaimer: This declaration is for information purpose only. This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular composition for a particular period. Beijing Siemens Cerberus Electronics Ltd. therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent under the law.