Data Sheet for Product

5
Siemens
A6V11160938_en
--
_c
Smart Infrastructure 2019-04-10
QSA2700D:
1. From the normal display page, press the push button for 2-10 s to enter the Modbus
parameter page.
2. Then, following the display indication, press the button for 2-10 s to enter the page for
Modbus configuration.
3. Select the desired operation by short pressing the button.
4. Following the display indication, activate the operation by pressing the button for：
– 2-10 s, to configure manually;
– 5-10 s, to configure the device via Climatix™ or LCD operation interface;
– 10-20 s, to reset the Modbus settings.
Mechanical design
1 Mounting plate
2 Two screws
3 Fine dust room sensor
Product documentation
Topic Title Document ID:
Installation, basic operation, parameters Mounting instructions A6V11160930
Operation, maintenance, troubleshooting Basic documentation A6V11160936
CE declaration CE declaration A6V11277342
Product environmental declaration Product environmental
declaration
A6V11284595
All documentation can be downloaded at http://siemens.com/bt/download.
Notes
Security
CAUTION
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
● Observe national provisions and comply with the appropriate safety regulations.
Engineering notes
Shielded cables must be used in environments with EMC problems.