Installation Instructions

Document No. 129-433
Installation Instructions
February 18, 2016
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners. © 2016
Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089
USA
+ 1 847-215-1000
Your feedback is important to us. If you have comments
about this document, please send them to
[e-mail]
Document No. 129-433
Printed in the USA
Page 4 of 4
Wiring Diagrams
Figure 7. QPM2180.
Figure 8. QPM2160, QPM2160D.
Figure 9. QPM2100, QPM2100D. Figure 10. QPM2162, QPM2162D.
Figure 11. QPM2102, QPM2102D.
G System voltage 24 Vac (SELV) U3 Signal output 0 to 10 Vdc or 0 to 5 Vdc
G0 System ground and measuring neutral R..(*) Signal output with R...= 0 to 10 Vdc;
U1 Signal output 0 to 10 Vdc or 0 to 5 Vdc without R... = 0 to 5 Vdc
U2 Signal output 0 to 10 Vdc or 0 to 5 Vdc B, M Passive temperature output (interchangeable)
NOTE: See QPM Series Indoor Air Quality Duct Sensors Technical Instructions (CE1N1962) for information on
positioning the jumpers on the setting elements.