User Guide

2
Software Installation and Commissioning
Installation and Configuration of Tera Term
16
Siemens Industry, Inc.
A6V11544782
02/22/2019
3. Ensure that the USB cable is connected to the Gateway and the computer.
4. Launch Tera Term from the Desktop shortcut or Programs menu. The following
dialog box will apear:
5. Select Serial.
6. Select the COM Port which is being used for the access point and clickOK.
NOTES:
If you cannot select Serial ensure that the driver is installed properly and the Gateway
is connected to the personal computer using the USB cable.
If more than one COM port is shown you can use Device Manager to determine the the
correct COM port. To access Device Manager on your personal computer, select the
following menu options:
Start Menu > Control Panel > System
Click on Device Manager (You may have to open the Hardware tab).
1. Scroll down until you see Ports (COM & LPT) and click the +sign to expand the list.
2. Select Setup and then Serial Port in Tera Term. Choose the port settings as shown
and click OK.