User Guide

2
Software Installation and Commissioning
USB Driver Installation (Windows 7 shown)
10
Siemens Industry, Inc.
A6V11544782
02/22/2019
Software Installation and Commissioning
Gateway Configuration
The USB driver and Tera Term Terminal Emulator installation MUST be completed first
so that a personal computer can communicate to a gateway.
Installing the USB Driver for the Wireless BAS Gateway
A USB driver file is required for the Wireless Sensor BAS Gateway to communicate
with a personal computer for configuration and data output. The USB driver can be
downloaded here. http://idealwirelesssensors.com/files/Gateway-USB-Driver-2014-10-
09.zip
USB Driver Installation (Windows 7 shown)
1. Download the file.
2. Unzip to a preferred location.(right Click - Extract All).
3. Plug in the 24V power supply to the gateway. (Siemens PN 535-104 24 Vdc power
supply sold separately.) The conductor labeled (+) terminates into the port on left
labeled 24V; the other conductor is the ground and terminates into the middle port
labeled Ground. The right port is unused.
4. Connect the Wireless BAS Gateway to the personal computer using the USB-A to
USB-B cable supplied with the gateway. Plug the USB cable into the computer,
then plug the other end into the PC INTERFACE port on the Wireless gatewayThe
computer should recognize new hardware. Manually install the driver as shown
below. DO NOT use Windows automatic driver search.
5. When the following pop up appears, click on it.
6. Select Skip obtaining driver software from Windows Update, then click on Yes on
the confirmation screen.