Data Sheet for Product

Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as
design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners. © 2018
Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
USA
[phone]
Your feedback is important to us. If you have
comments about this document, please send them to
[e-mail]
Document No. 149-715
Printed in the USA
Page 2 of 2
Product Ordering Information
Part Number
1)
Temp Humidity
2)
CO
2
3)
Display
Setpoint
Adjustment
Tool Port
Communication
Type
QAA2280.DWSC • — — • — • Digital (P1)
QAA2280.EWSC • — — — — • Analog - Resistive
QAA2280.FWSC • — — • • •
Digital (P1)
QFA3280.DWSC • • — • — •
QFA3280.EWSC • • — — — •
QFA3280.FWSC • • — • • •
QPA2282.EWSC
2)
• — • — — •
QPA2284.EWSC
2)
• • • — — •
QPA2284.FWSC
2)
• • • • • •
1)
For no-logo version, change "S" to "N" in part number position 10.
2
)
QPA models require an AQM2200 24V Power Module.
3)
P1 TECs cannot read relative humidty and CO
2
data. Use BACnet TECs for applications requiring these measurements.
Accessories Ordering Information
Description Part Number
Power Module
1)
(Required only with QPA2282 and QPA2284 sensors) AQM2200
Room Unit Back Plate (10-pack)
1)
AQA2200-INTL
Room Unit Back Plate (Single)
1)
AQA2200-2X4
Room Sensor Insulating Gasket (10-pack) (Recommended for hollow wall installations.) 563-102 GSKT KIT
25-foot (7.6 m) cable with connections 588-100A
50-foot (15.2 m) cable with connections 588-100B
100-foot (30.5 m) cable with connections 588-100C
Passkey Tool (Used to set room unit parameters) 544-643A
Replacement RH Sensing Element – TEC Room Unit
2)
AQF3060
1)
For use when installing Series 2200/3200 Sensors on conduit boxes other than US style 2” × 4”. Back plate measures 3-1/4” ×
5” (82.55 mm × 127 mm).
2)
For use with all QFA models and QPA2284.xxxx only.
Disposal
The devices are considered electrical and electronic equipment for disposal in terms of the applicable
European Directive and may not be disposed of as domestic garbage.
• Dispose of the devices through channels provided for this purpose.
• Comply with all local and currently applicable laws and regulations.