Environmental Declaration

EPD - Type II
Based on ISO 14021
*Variant parts list
[g]
Total weight of device
Housing front
Cover (LCD) (only QxA20xxD)
PCB LCD module
Fire load [MJ]
Typical energy consumption
[kWh/a]
Comments
A5W90011819 ##
QFA2068D
116
22
1
QFA2068
103
23
4
2
14
3
4
QFA2079
103
23
7
2
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive, including the 4 phthalates added to Annex
II in 2015.
To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the
candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) in concentrations above 0.1 % w/w. Contained REACH candidate substances, which will become known at a later date, are listed on the
delivery note.
(Status according to the creation date of this document.)
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.
Legal Disclaimer: This declaration is for information purpose only.
Beijing Siemens Cerberus Electronics Ltd. therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the
maximum extent under the law.
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular
composition for a particular period.
The device should not be disposed of as unsorted municipal waste. The special treatment for specific components may be
mandated by law or ecologically sensible.
Observe all local and applicable laws.
Disposal
Regulation (EC) No. 1907/2006 (REACH)
The device is halogen-free with exception of:
PCB(TBBA)
Restricted Page 2/2