Environmental Declaration
s
2016-09-09 CA1E1552_en--_-b Page 2 von 2
Materials Total weight of device
QBM81-..
137 g
Total weight of device
QBM9903-..
116 g
Plastics PA GF 15 Pressure screw 3 g
PC Cover 13 g
PC GF 10 Housing 56 g
Silicone LSR, emission-free Diaphragm 1 g
ABS Sensor tubes 5 g
PVC, soft Plastic tube 48 g
Metals CuZn38Pb1.5 Riveted bolt 9 g
Steel Mounting bracket QBM81-.. 48 g
Steel Mounting bracket QBM9903-.. 22 g
Steel Screws 4 g
CuSn Contact support 4 g
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
Disposal The device must not be disposed of as unsorted municipal waste. The special treatment for
specific components may be mandated by law or ecologically sensible.
Observe all local and applicable laws.
Comments
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive.
Materials
The devices are free from substances banned by the Directive 2011/65/EU (RoHS):
- Pb, Hg, Cr6+, PBB, PBDE: < 0.1 % by weight in homogeneous materials
- Cd: < 0.01 % by weight in homogeneous materials
The devices are free from substances which interfere with lacquer wetting.
The devices are delivered with the following accessories:
Duct adaptors (5g, ABS halogen free) and tubing (48g, PVC) in PE bag.
Legal Disclaimer: This declaration is for information purpose only.
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee
that the product will retain a particular composition for a particular period.
Siemens Schweiz AG therefore does not assume liability for any error or for any consequences which may arise from the use of this
information to the maximum extent under the law.
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.