User Manual

Building Technologies
31.03.2010 CA1E1921en
Page 2 of 2
Materials
Total weight of device
618 g
Plastics Silicone rubber Sealing compound
24 g
Nitrile rubber Sealing
1 g
POM Centering ring
1 g
Metals Steel, stainless
Housing
Transducer
Base and ring
Cover
Divers small parts
253 g
109 g
62 g
7 g
13 g
CuSnPb3
2 adapters
2 nuts
4 distance brackets
21 g
17 g
4 g
CuZn Screw connection and nut
13 g
Aluminum AlMgSi
Cover
Spacer
19 g
4 g
Spring steel 4 disk springs
6 g
Sensor Al
2
O
3
(96 %)
7 g
Cable PVC / Cu
50 g
Circuit boards with
components
FR4 TBBA, solder SnAgCu
7 g
The total weight of a device may deviate from the total of the weights of all its individual components due to rounding.
Disposal
Do not dispose of the device as part of unsorted municipal waste.
This particularly applies to electronic circuit boards.
Additionally, the law may mandate special treatment for specific components or
special treatment may be ecologically sensible.
Observe all local and applicable laws.
Notes
Materials: All sensors are delivered with a fastening angle (38 g, stainless steel) with screws in a PE-bag.
CuSnPb3 RoHS admits up to 4 % Pb by weight in copper alloys. (appendix, cipher 6)
Legal disclaimer: This declaration is for information purposes only
This environmental product declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that
the product will retain a particular composition for a particular period.
Siemens Switzerland Ltd. therefore does not assume liability for any error or for any consequences which may arise from the use of this
information to the maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.