Data Sheet for Product

ManualsBrandsSiemens ManualsSensors PressureEU Declaration of Conformity QBE63-DP..

920

Differential Pressure

Sensors

QBE63-DP...

for neutral and mildly corrosive liquids and gases

Differential pressure sensor, suitable for gases and liquids, for the measurement

of positive and negative pressures and pressure differentials in HVAC systems.

• Hall-effect transducer technology

• Highly resistant to positive pressure

• Simple, robust construction for highly reliable operation

• For neutral and mildly corrosive liquids and gases

• Supply voltage AC 24 V or DC 20...30 V

• DC 0...10 V output signal

• Female-threaded G

/8" connection

Use

The QBE63-DP... differential pressure sensors are particularly suitable for use in HVAC

systems for continuous monitoring of the level or flow rate of neutral or mildly corrosive

gases or liquids.

The pressure being monitored acts on a measuring system comprising a diaphragm,

permanent magnet and Hall-effect transducer. The measured pressure is converted

electronically into a linear DC 0 ...10 V output signal.

Types

Type

Pressure range

QBE63-DP01

0 ... 100 mbar

0 ... 10 kPa

QBE63-DP02

0 ... 200 mbar

0 ... 20 kPa

QBE63-DP05

0 ... 500 mbar

0 ... 50 kPa

QBE63-DP1

0 ... 1 bar

0 ... 100 kPa

1920P01

CA1N1920E

2014-07-30

Building Technologies

Summary of content (6 pages)

PAGE 1
1920P01 920 Differential Pressure Sensors QBE63-DP... for neutral and mildly corrosive liquids and gases Differential pressure sensor, suitable for gases and liquids, for the measurement of positive and negative pressures and pressure differentials in HVAC systems. • • • • • • • Hall-effect transducer technology Highly resistant to positive pressure Simple, robust construction for highly reliable operation For neutral and mildly corrosive liquids and gases Supply voltage AC 24 V or DC 20...
PAGE 2
Ordering and delivery When ordering, please specify the quantity, product name and type code. Example: 1 differential pressure sensor, type QBE63-DP05 A suitable fixing bracket is supplied with the sensor. Any accessories required must be ordered separately. Compatibility The QBE63-DP... differential pressure sensors can be used in conjunction with all devices or systems capable of processing the DC 0…10 V output signal.
PAGE 3
Accessories AQB2002 Mounting kit for remote mounting with 1 m copper capillary line, both ends prefabricated ready for connection. Thread adapters and terminal nuts made of brass. Pressure connection with G1/8“ or G1/2“ outer threading. Mounting instructions Mounting instructions are enclosed with the differential pressure sensor. The QBE63-DP... sensors can be connected directly with G1/8" or R1/8" screwed fittings.
PAGE 4
Technical data Electrical interface Power supply Supply voltageCurrent consumption Low voltage (SELV, PELV) AC 24 V +15 / –10 %, 50 / 60 Hz or DC 20...30 V <35 mA External supply line protection Fuse slow max. 10 A or Circuit breaker max. 13 A Characteristic B, C, D according to EN 60898 or Power source with current limitation of max.
PAGE 5
Directives and Standards EU Conformity (CE) EN 61326-1 Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements. CA1Ta920xx *) RCM Conformity 8000078879 *) Product standard Environmental compatibility The product environmental declaration CE1E1920*) contains data on environmentally compatible product design and assessments (RoHS compliance, materials composition, packaging, environmental benefit, disposal).
PAGE 6
Connection terminals 80358 Supply voltage AC 24 V or DC 20 ... 30 V DC 0 ...10 V output signal (reference point GND) GND G + U M 0 Dimensions Fixing bracket 43 920073 20 22 72 94 G 1/8 ø 5,2 10 60 40 46 ø 65 G 1/8 11 18,8 47 63 Dimensions in mm 6/6  2005-2014 Siemens Switzerland Ltd.