Environmental Declaration

Building Technologies
31.03.2010 CA1E1920en
Page 2 of 2
Materials
Total weight of device
Chart *
Plastics ABS Protection cover
27 g
PS Pressure screw
1 g
Chloroprene rubber Sealing
2 g
Neoprene Sealing ring
1 g
HDPE 3 protection plugs
3 g
Metals CuZn Pressure housing: base and print connector
Chart *
CuZn, nickel-plated 2 distance brackets
5 g
CuZn 2 distance disk
3 g
Steel, zinc-plated
Fastening angle with screw
2 bolts, 2 screws
43 g
4 g
Steel, stainless
2 pressure springs
6 screws
Chart *
12 g
Membrane
91 % stainless steel
9 % plastics
Pressure transducer
Chart *
Circuit boards with
components
FR4 TBBA, solder SnAgCu
20 g
* Variant part list
QBE63-DP01 QBE63-DP02 QBE63-DP05 QBE63-DP1
Total weight 942 g 946 g 1020 g 1023 g
Pressure housing: base 386 g 386 g 434 g 434 g
Pressure housing: print connector 403 g 403 g 446 g 446 g
2 pressure springs 11 g 15 g 6 g 9 g
Pressure transducer compl. 20 g 20 g 12 g 12 g
The total weight of a device may deviate from the total of the weights of all its individual components due to rounding.
Disposal
Do not dispose of the devices as part of unsorted municipal waste.
This particularly applies to electronic circuit boards.
Additionally, the law may mandate special treatment for specific components or
special treatment may be ecologically sensible.
Observe all local and applicable laws.
Legal disclaimer: This declaration is for information purposes only
This environmental product declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that
the product will retain a particular composition for a particular period.
Siemens Switzerland Ltd. therefore does not assume liability for any error or for any consequences which may arise from the use of this
information to the maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.