Environmental Declaration

s
Building Technologies
28 Feb 2011 CA1E1923en Page 2 of 2
Materials
Total weight of device
1482 g
Plastics ABS Housing
116 g
PA Cable gland
10 g
PE Sleeve
10 g
Q Silicone rubber Filler
24 g
Foam rubber Gasket
3 g
Metals Stainless steel Housing, bracket, cover
828 g
Steel Screws
12 g
Spring steel Spring
6 g
CuZn Bracket
31 g
CuZn39Pb3 Spacer, adapter
416 g
CuNi18Zn20 Dome
7 g
Others Cu/PVC Cable
4 g
Ceramics Sensor
8 g
PCB assembled FR4, solder SnAgCu PCB
7 g
Disposal
The devices should not be disposed of as unsorted municipal waste.
The special treatment for specific components may be mandated by law or
ecologically sensible.
Observe all local and applicable laws.
Comments
Materials:
The devices are free from substances banned by the Directive 2002/95/EC (RoHS):
- Pb, Hg, Cr6+, PBB, PBDE: < 0.1 % by weight in homogeneous materials
- Cd: < 0.01 % by weight in homogeneous materials
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.
Legal disclaimer: This declaration is for information purposes only
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee
that the product will retain a particular composition for a particular period.
Siemens Schweiz AG therefore does not assume liability for any error or for any consequences which may arise from the use of this
information to the maximum extent under the law.