User Manual

Building Technologies
05 July 2011 CE1E1922en
Page 2 of 2
Materials
Total weight of device
558 g
Plastics PE Protection for plug
4 g
PA; GF 0% Plug
8 g
Q Silicone rubber Filling compound
24 g
Metals Stahl CrNi Housing parts P1, P2
424 g
CuZn39Pb3 Thread adapter with gland
44 g
Al alloy Hood
20 g
Cu alloy Screening hood
7 g
Stahl Spring
6 g
Steel CrNi Ring
3 g
Steel Screws
7 g
Other materials 96% Al2O3 Membrane sensor complete
9 g
Circuit board with
components
FR 4; TBBA; SnAgCu solder Printed circuit board
7 g
(The total weight of a device may deviate from the total of the weights of all its individual components due to rounding.)
Comments
Materials:
The devices are free from substances banned by the EU-Directive 2002/95/EC (RoHS) – allowing for the
exemptions acc. to Decision 2010/571/EU:
– Pb, Hg, Cr6+, PBB, PBDE: <0.1% by weight in homogeneous materials
– Cd: <0.01% by weight in homogeneous materials
Regulation (EC) No. 1907/2006 (REACH)
To the best of our knowledge and according to the information of our suppliers the devices and their
packaging contain no substances of the candidate list according to Article 59 (1, 10) of the regulation (EC)
No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)
in concentrations above 0.1 % w/w.
Halogens:
The devices are halogen-free, excepted for the PCB (TBBA)
Accessories: The devices are delivered with the following accessories:
Mounting bracket set (43 g, CrNi steel), Device socket 3P+E with gasket UL (32 g) in PE bag.
Legal disclaimer: This declaration is for information purposes only
This environmental product declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that
the product will retain a particular composition for a particular period.
Siemens Building Technologies Ltd. therefore does not assume liability for any error or for any consequences which may arise from the
use of this information to the maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.