User Manual

Building Technologies
05 July .2011 CE1E1909en
Page 2 of 2
Materials
Total weight of device
QBE2x02-P1 - P10
QBE2x02-P16 - P40
258 g
259 g
Plastics PA6 / PA6.6 Cable mounting parts
9 g
PA6 GF30 Cover top
4 g
POM GF20
Supporting ring,
pressure plate
2 g
Q silicone rubber Sealing compound
14 g
Metals Steel stainless
Pressure pick-off, cover base
miscellaneous small parts
130 g
12 g
Spring steel
Plate spring P1 - P10
Plate spring P16 - P40
2 g
3 g
AlCu Tensioning element
33 g
Al
2
O
3
Sensor
5 g
Other materials PVC / Cu Cable
44 g
PA / Fe Ferrite core
1 g
Circuit boards with
components
FR4, TBBA, SnAgCu solder EMV protection print
2 g
(The total weight of a device may deviate from the total of the weights of all its individual components due to rounding.)
Disposal
Do not dispose of the devices as part of unsorted municipal waste.
This particularly applies to electronic circuit boards.
Additionally, the law may mandate special treatment for specific components or
special treatment may be ecologically sensible.
Observe all local and applicable laws.
Legal disclaimer: This declaration is for information purposes only
This environmental product declaration does not constitute a guarantee concerning the characteristics of a product, nor does it
constitute a guarantee that the product will retain particular characteristics for a specified period.
Siemens Switzerland Ltd. therefore does not assume liability for any error or for any consequences which may arise from the use of
this information to the maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.