User Manual

2/6
Smart Infrastructure Pressure sensors QBE2002-P... CE1N1909en
2021-04-07
Type summary
Type reference Pressure range Output signal
QBE2002-P1 0...1 bar 0...100 kPa 0...14.5 psi 0…10 V
QBE2002-P2 0...2 bar 0...200 kPa 0...29.0 psi 0…10 V
QBE2002-P4 0...4 bar 0...400 kPa 0...58.0 psi 0…10 V
QBE2002-P5 0...5 bar 0...500 kPa 0...72.5 psi 0…10 V
QBE2002-P10 0...10 bar 0...1.0 MPa 0...145.0 psi 0…10 V
QBE2002-P16 0...16 bar 0...1.6 MPa 0...232.0 psi 0…10 V
QBE2002-P20 0...20 bar 0...2.0 MPa 0...290.0 psi 0…10 V
QBE2002-P25 0...25 bar 0...2.5 MPa 0...362.6 psi 0…10 V
QBE2002-P40 0...40 bar 0...4.0 MPa 0...580.0 psi 0…10 V
QBE2002-P60 0...60 bar 0...6.0 MPa 0...870.0 psi 0…10 V
QBE2102-P4 0...4 bar 0...400 kPa 0...58.0 psi 4…20 mA
QBE2102-P5 0...5 bar 0...500 kPa 0...72.5 psi 4…20 mA
QBE2102-P10 0...10 bar 0...1.0 MPa 0...145.0 psi 4…20 mA
QBE2102-P16 0...16 bar 0...1.6 MPa 0...232.0 psi 4…20 mA
QBE2102-P20 0...20 bar 0...2.0 MPa 0...290.0 psi 4…20 mA
Ordering
When ordering, please give name and type reference, e.g.:
Pressure sensor QBE2002-P1
Any accessories required must be ordered separately.
Equipment combinations
The pressure sensors can be combined with all devices or systems capable of
processing the DC 0 ...10 V or DC 4…20 mA output signal from the pressure sensor.
Mechanical design
The pressure sensors are compact units and cannot be dismantled. No changes or
adjustments are possible.
Accessories
AQB22.1 Fixing bracket for sensor (for remote mounting). For dimensions, refer to
"Dimensions"
AQB2001 Mounting kit for remote mounting with 1 m copper capillary line, both ends
prefabricated ready for connection.
Thread adapters and terminal nuts made of brass. Pressure connection with
G1/8“ or G1/2“ outer threading.