Operating Instructions

89 / 110
Siemens Synco™ living CE1B2740en
Building Technologies Room unit QAW910 13.12.2010
The room temperature setpoint adjustment acts on the heating and cooling
setpoint.
Readjustments on the individual room units can be displayed on the
central apartment unit (see page 40).
The room temperature setpoint read-
justment is displayed with a readjust-
ment bar.
When controlling to the Precomfort or Comfort setpoint, the readjustment bar
continues to be displayed also after leaving the room temperature setpoint re-
adjustment.
If no button is pressed for 4 seconds,
the room unit returns to the normal
display.
The room temperature setpoint readjustment made only acts on the
Comfort or the Precomfort setpoint.
Display
Full display
During commissioning, the full display
appears for 2 seconds. This allows for
fault testing the display.