Operating Instructions

68 / 110
Siemens Synco™ living CE1B2740en
Building Technologies Central apartment unit QAX9x3 13.12.2010
Any open windows and doors can now be closed.
After you close the supervised window, the constant signal becomes a beep
that doubles in the last 15 seconds of supervision delay. The remaining su-
pervision delay time is also displayed on the central apartment unit.
The desired delay time (00.00..59.55 m.s, "---" indefinite) can be set via the
following commands and applies to all windows and doors:
Main menu > Supervision > Supervision delay:
Factory setting 05.00 m.s
If supervision delay is set to indefinite "---", supervision is activated
upon closing the first door (without delay time). See page 68.
You can set the
volume of the signal/beep as desired (0..100%). When you
set the volume, a permanent beep is sounded at the corresponding volume.
Main menu > Supervision > Volume supervis dly:
Factory setting 15 %
Setting 0% deactivates the signal sound/beep during supervision delay .
Change absence
Determine if the absence function is to be activated together with supervision.
Main menu > Supervision > Change absence:
No Activate/deactivate supervision has no influence on absence.
Yes Activate/deactivate supervision influences absence (factory setting)
• Setting supervision to "All monitored" starts the absence func-
tion (absent).
• Setting supervision to "Partly monitored" or "Inactive" ends the
absence function (present).
Release of supervision
Indicate in the central apartment unit the doors and windows that are to be
"partly monitored" or "all monitored".
These two functions provide for two different types of supervision, e.g. for
short absences when you want to keep open some windows for ventilation
and thus exclude them from supervision. And for longer absences (e.g. vaca-
tion) when you want to supervise all windows and doors.
Windows
The option list contains all rooms. Select the rooms with windows to be super-
vised.