Operating Instructions

63 / 110
Siemens Synco™ living CE1B2740en
Building Technologies Central apartment unit QAX9x3 13.12.2010
Depending on the types of blinds used, you may only be able to save
and query the two blinds states fully open and fully closed for some
scenes.
Create scenes
For the switching groups, a scene A and scene B can be created.
Enter the required name of the scene at the central apartment unit:
Main menu > Switching groups > Switching group X
> Scene X > Scene X:
Then, use local actuator control to drive all actuators to the required position.
After that, store the scene by pressing the respective softkey for at least
3 seconds. Storage is confirmed by the central apartment unit in the form of a
short acoustic signal.
You trigger the stored scenes by a short push on the respective softkey.
The scenes can also be stored and retrieved via operating parameters:
Main menu > Switching groups > Switching group X
> Scene X > Trigger scene:
Trigger switching groups via an event
In addition to manual triggering, the function of a switching group can be
automatically triggered via one or several events.
Select the event (or the events) that triggers a switching group configured for
Switch or Dim:
Main menu > Switching groups > Switching group X > Events on cmd:
Main menu > Switching groups > Switching group X > Events off cmd:
Select the event (or the events) that triggers a switching group configured for
Blind:
Main menu > Switching groups > Switching group X > Events up cmd:
Main menu > Switching groups > Switching group X > Events down cmd:
Select the event / events that trigger(s) a switching group configured for
scenes:
Main menu > Switching groups > Switching group X
> Scene A or B > Events scene:
Absence on Execution of command when changing from
“Absence OFF” to "Absence ON” (= going).
Absence off Execution of command when changing from
"Absence ON” to "Absence OFF” (= coming).
Twilight switch dark Execution of command when the twilight switch
changes from BRIGHT to DARK.