Operating Instructions

42 / 110
Siemens Synco™ living CE1B2740en
Building Technologies Central apartment unit QAX9x3 13.12.2010
Set new switching points
For every weekday and the special day, you can set and define up to 6 switch-
ing points where the room temperature setpoint should change.
Monda
y
- - : - - - - - - - -
To define a new switching point,
press the Arrow down button until
an empty switching point appears
(--:--, after the existing switching
points). Now press the Menu/ok but-
ton.
Monda
y
Ab 06:00 Com
f
Use the Navigation buttons to set a
value between 00:00 and 23:59. Con-
firm the setting with the Menu/ok but-
ton.
Monda
y
From 06:00 Com
f
f
Adjust the room temperature setpoint
(Comfort, Precomfort or Economy)
that should apply after this switching
time.
Monda
y
From 06:00 Com
f
To complete the setting, press again
the Menu/ok button. The display re-
turns to the menu.
Adapt and delete switching points
Monda
y
Ab 06:00 Com
f
To change an existing switching
point, select it with the Arrow buttons
and then press the Menu/ok button.
Use the Arrow buttons to change the
value.
Monda
y
- - : From 06:00 Comf
To delete a switching point, press the
Arrow buttons until “- - : - -“ is dis-
played (before 00:00 and after 24:00).
06:00
Comf
06:00
- - : - -