Operating Instructions

26 / 110

Siemens Synco™ living CE1B2740en

Building Technologies Central apartment unit QAX9x3 13.12.2010

…

• DHW (configurable, QAX913 only)

• Consumption data (configurable)

• Business card (configurable)

• Button assignment (QAX913 only, except for quiescent picture format = 5)

• Device state

• Fault status message bus (configurable)

The type and number of available info pages depend on your plant

(number of rooms, ventilation, etc.).

The info pages on the QAX913 can also be called up via softkeys as-

signed accordingly (refer to page 61).

Menu levels

Press the Menu/ok button to go from the quiescent picture or the info page to

the menu level (main menu). Press the Esc button to return to the quiescent

picture.

Main menu

artment…

Rooms…

Ventilation…

DHW…

The menu header “Main menu" and

the associated symbol are display fol-

lowed by a list of available menus.

Setting principle

General rules

Values are always readjusted in an additional window on the display (edit pop-

up). The range of action (cursor) always appears inverse.

Readjustments are made in individual steps with the Arrow buttons (up/down).

Longer pushes on the buttons speed up the process. Confirm the setting by

pressing the Menu/ok button. To cancel the process or to navigate back to the

next higher menu level, press the Esc button.

The following examples illustrate the different setting choices.

Set a numerical value

Comfort

With numerical values, the setting

range is shown on the left (upper and

lower limit). The current setting value

is displayed inverted on the right.