Commissioning Instructions

78 / 134
Siemens Synco™ living CE1C2740en
Building Technologies Commissioning the system 13.12.2010
Connect inputs
Connect inputs for operating mode contact
Inform the central apartment unit that you want to use an input to connect an
operating mode contact:
Main menu > Commissioning > RF connections
> Inputs > Operating mode contact > Connect device:
The following device channels can be connected:
• Universal input B of a heating circuit controller (see page 62).
• Universal input Xx of a multi-contro
ller (see page 65).
Connect input for summer operation
Inform the central apartment unit that you want to use an input to connect a
summer operation contact:
Main menu > Commissioning > RF connections
> Inputs > Summer operation > Connect device:
The following device channels can be connected:
• Universal input B of a heating circuit controller (see page 62).
• Universal input Xx of a multi-contro
ller (see page 65).
Connect input for cooling enable
Inform the central apartment unit that you want to use an input to connect a
cooing enable contact:
Main menu > Commissioning > RF connections
> Inputs > Cooling enable > Connect device:
The following device channels can be connected:
• Universal input B of a heating circuit controller (see page 62).
• Universal input Xx of a multi-contro
ller (see page 65).
Connect input for heating/cooling changeover
Inform the central apartment unit that you want to use an input to connect an
H/C changeover mode contact:
Main menu > Commissioning > RF connections
> Inputs > H/C changeover > Connect device:
The following device channels can be connected:
• Universal input B of a heating circuit controller (see page 62).
• Universal input Xx of a multi-contro
ller (see page 65).