Commissioning Instructions

31 / 134
Siemens Synco™ living CE1C2740en
Building Technologies Commissioning the system 13.12.2010
--- Inactive – no switching group relay required
(factory setting).
Via RF Relay output Qx of an RRV91… heating circuit controller
or RRV934 multi-controller used as a switching group relay.
Q1 (local) Relay output Q1 of the central apartment unit used as a
switching group relay.
Configure doors (QAX913 only)
The QAX913 central apartment unit can monitor up to two doors and display
their status on the info page.
A name can be assigned to each door.
Main menu > Commissioning > Basic configuration
> Doors > Door X > Door X:
Activate a door by setting the function to "Active":
Main menu > Commissioning > Basic configuration
> Doors > Door X > Function:
--- Inactive – Door contact not needed (factory setting).
Active Door to be monitored via door contact.
Configure meter
The central apartment unit can display consumption data from various meter
types and provide them for readout.
Synergyr
When partially migrating a Synergyr plant (replace WRV8x or WRI80), the me-
ter data can be sent to the Synergyr OZW30 unit via the Synergyr building
bus.
Activate communication with the Synergyr unit by setting Synergyr to "Active":
Main menu > Commissioning > Basic configuration
> Meter > Synergyr:
--- Inactive – no Synergyr unit available (factory setting).
Active Communication with Synergyr unit active.