Commissioning Instructions

15 / 134
Siemens Synco™ living CE1C2740en
Building Technologies Mounting and installation 13.12.2010
Swing the electronics sec-
tion 45° upward and pull it
towards you to remove it.
Fit the base
Secure the base to the wall
using at least 3 fixing screws.
Wiring
Wiring is described under “Connection terminals/wiring“ (see page 16).
Replace the electronics section
Insert the electronics section
at an angle of about 45° in the
base (left and right). Then,
swing it downward until it en-
gages.
The central apartment unit is
now ready for commissioning.