User Manual

81 / 100
Siemens Synco™ living Operating instructions CE1B2707en
Building Technologies Room unit QAW910 23.08.2008
Overriding by the central apartment unit to maintain the
Economy setpoint.
Overriding by the central apartment unit to maintain the
Protection setpoint.
The time program and the special day program are set on the central
apartment unit.
In the case of overriding by the central apartment unit, the display
shows the symbol of the central apartment unit
and the symbol of
the active operating level.
Room timer function
Using the Room timer button (
), you can force the system to
maintain the Comfort temperature for an adjustable period of time.
When pressing the button, the room timer symbol, the symbol of the
Comfort setpoint and the duration of the selected Comfort mode
(00:00) will appear on the display.
With every push on the Room timer
button, the duration of Comfort mode
is extended by 30 minutes. Pressing
the button speeds up the setting.
If no button is pressed for 4 seconds, the setting is adopted and Comfort
mode is displayed.
The display shows the hourglass
symbol which disappears again as
soon as the central apartment unit has
adopted the settings made on the
room unit.
When the room timer function is active and the Room timer button is pressed,
the timer’s remaining time is displayed. It can be set to 30 minutes by pressing
again the Room timer button and each additional push of the button extends
the time by another 30 minutes.
An active room timer function can be aborted by setting the extension time to
00:00, or by pressing the Mode button.
For the room timer function to be activated, the apartment operating
mode must be set to ”Auto”. In addition, no absence or holiday function
for the apartment may be active.