User Manual

38 / 100
Siemens Synco™ living Operating instructions CE1B2707en
Building Technologies Central apartment unit QAX910 23.08.2008
Copying switching times
When you scroll to the end of the switching point list, option “Copy to:“ will
appear.
Monda
y
Co
py
to:
You can copy the switching times of
the respective day to any other
weekday (including the special day)
or to a number of weekdays (Mo – Fr
or Mo – Su).
Setting new switching points
For every weekday and the special day, you can set and define up to 6 switch-
ing points where the room temperature setpoint should change.
Monda
y
- - : - - - - - - - -
To define a new switching point,
press the Arrow down button until
an empty switching point appears
(--:--, after the existing switching
points). Now, press the Menu / ok
button.
Monda
y
From 06:00 Com
f
Use the Navigation buttons to set a
value between 00:00 and 23:59.
Confirm the setting with the
Menu / ok button.
Monda
y
From 06:00 Comf
Now, adjust the room temperature
setpoint (Comfort, Precomfort or
Economy) that should apply after this
switching time.
Monda
y
From 06:00 Com
f
To complete the setting, press again
the Menu / ok button. The display
returns to the menu.
Adapting and deleting switching points
Monda
y
From 06:00 Com
f
To change an existing switching
point, select it with the Arrow buttons
and then press the
Menu / ok button. Use the Arrow
buttons to change the value.
06:00
Comf
06:00