User Manual

27 / 100
Siemens Synco™ living Operating instructions CE1B2707en
Building Technologies Central apartment unit QAX910 23.08.2008
General
Absence
If you leave the house for a few hours, you can press the Absence / Supervi-
sion button to inform the central apartment unit about your departure. Shortly
pressing the Absence / Supervision button opens the presence window
which allows you to enter the desired state "Absent" or "Present" via the Ar-
row buttons or the Absence / Supervision button.
If supervision functions are configured, the supervision window opens imme-
diately after the absence window to allow you to enter the desired supervision
pattern (see next page).
If "Absent" is entered, only the absence symbol appears on the display.
Pressing the Absence / Supervision button again opens the absence window,
and selecting "Present" deactivates the absence function and the related impact.
Your absence has the following impact on the system:
• During the period of absence, space heating, cooling, ventilation and DHW
is controlled in accordance with the operating mode selected for absence
• A presence simulation program – if selected – is started
• Switching groups set for the event “Absence on“ (= going) will operate
accordingly (switching / dimming, blinds open / closed, scenes)
For additional descriptions, refer to the following pages:
Room mode during absence (page 34).
Ventilation opera
ting mode upon absence (page 46)
DHW operating mode during absence (page 55)
.
Triggering a switching group via an event (page 60
).
Presence simulation for switching groups (page 62)
.
Supervision
Briefly pressing the Absence / Supervision button opens the absence win-
dow followed immediately by the supervision window. Press the Absence /
Supervision button longer than 0.4 s to open the supervision window imme-
diately. This window allows you to select between the following supervision
patterns by pressing the Absence / Supervision button or the Arrow buttons:
Inactive The supervision function is inactive.
Partly monitored
The windows (rooms) and doors selected in the
"Partly monitored" option lists are supervised.
All monitored
The windows (rooms) and doors selected in the
option lists "All monitored" are supervised.
The supervision window appears only if windows or doors are enabled
for supervision. See "Release of supervision“ page 66.
When supervised w
indo
ws and doors are open and when supervision is acti-
vated, an associated display appears and a constant signal is sounded.