User Manual

75 / 124

Siemens Synco™ living CE1C2707en

Building Technologies Commissioning the system 23.08.2008

Connect the window / door state output

Inform the central apartment unit that you want to use a universal relay output

Qx of a heating circuit controller or a multi-controller as a window / door state

output:

Main menu > Commissioning > RF connections

> Outputs > Window /door state > Connect device:

Confirm subentry “Connect device“ by pressing the Menu/ok button. To make

the connection, you are prompted to press the binding button on the device to

be connected.

Use the channel selection button (CH) to select a universal relay output Qx of

the heating circuit controller or multi-controller. The LED of the selected chan-

nel blinks. If the selected channel is not yet connected, the binding LED

flashes.

Now, press the binding button on the heating circuit controller or multi-

controller. The LED lights up green. When it starts blinking, you can release

the binding button.

A successful connection appears on the display of the central apartment unit

and is confirmed with a beep. Close the binding process by pressing the

Menu/ok button.

Connect the output for exhaust hood