User Manual

73 / 124

Siemens Synco™ living CE1C2707en

Building Technologies Commissioning the system 23.08.2008

Connect outputs

Connect the output for heat demand DC 0..10 V

Inform the central apartment unit that you want to use universal output U of

the RRV912 heating circuit controller or of the multi-controller as a DC 0..10 V

heat demand output:

Main menu > Commissioning > RF connections > Outputs

> Heat demand DC 0...10 V > Connect device:

Confirm subentry “Connect device“ by pressing the Menu/ok button. To make

the connection, you are prompted to press the binding button on the device to

be connected.

Use the channel selection button (CH) to select universal output U of the

heating circuit controller or multi-controller. The LED of the selected channel

blinks. If the selected channel is not yet connected, the binding LED flashes.

Now, press the binding button on the heating circuit controller or multi-

controller. The LED lights up green. When it starts blinking, you can release

the binding button.

A successful connection appears on the display of the central apartment unit

and is confirmed with a beep. Close the binding process by pressing the

Menu/ok button.

Connect the heat demand relay

Inform the central apartment unit that you want to use a universal relay output

Qx of a heating circuit controller or multi-controller as a heat demand output:

Main menu > Commissioning > RF connections

> Outputs > Heat demand relay > Connect device:

Confirm subentry “Connect device“ by pressing the Menu/ok button. To make

the connection, you are prompted to press the binding button on the device to

be connected.

Use the channel selection button (CH) to select a universal relay output Qx of

the heating circuit controller or multi-controller. The LED of the selected chan-